Infrared heater Sauna WeissLicht Top Set-2 for surface mounting in Finnish and humid saunas

- Infrared deep heat radiator ABC full spectrum
- tested and certified by SEIBERSDORF Laboratories!
- In the set infrared zone control DT1 or DT3 (see option)
- ideally suited as a retrofit for sauna
- Waterproof IPx4 and temperature resistant
- High-performance glass ceramic WHITE
- Surface mounting on CEILING or WALL

Scope of delivery:
2 x infrared emitters (option 350, 500, 750, 1300 watt)
2 x built-in glass ceramic cover plate in WHITE
2 x fire protection tape 2.5m
2 x silicone connection cable including plug (GST18i3) 3m
1 x IR zone control DT1 or DT3 (see option)
1 x connection cable control / socket, 5m (see option)

Infrared heater WeissLicht Top for sauna
Our infrared sauna deep heat radiator has been specially developed for your sauna or infrared cabin to be mounted on the wall or ceiling, to do something good for your body with infrared deep heat. So you have the ideal product, because only infrared A-B-C full-spectrum heater tubes tested and certified by the Seibersdorf Laboratories institute are installed in our infrared heaters. The infrared "A" component in particular ensures a high penetration depth that effectively reaches your joints, tendons and muscles.

Dimensions:
• Length: 980 mm
• Width: 320 mm
• Depth: 80 mm

Effective irradiation distance & installation instructions:
• 350 watts> 5-35 cm (wall & ceiling installation)
• 500 watts> 10-50 cm (wall & ceiling installation)
• 750 watts> 40-90 cm (only ceiling installation)
• 1300 watts> 80-130 cm (only ceiling installation)

Technical specifications:
Connection voltage 230 V, 50-60 Hz.
500W (2.2A), 750W (3.3A), 1300W (5.7A)
Weight about 2.5 kg

Infrared heater control DT1
• 3 outputs each up to 1300 watts
• however, all 3 outputs overall line max. 3,650 W
• Dimming function: 50-60-70-80-90-100%
• Time setting: 5-15-30-60-120-180 minutes
• 3 built-in sockets GST 18 i
• Safety temperature sensor: 130 ° C
• Connected load: 230V AC, 50/60 Hz

Option: infrared heater control DT3
• 3 separately controllable outputs each up to 1300 watts
• Separate intensity control and individual on / off switching

Well thought-out details will make the difference to similar products clear to you at first glance: In many tests, optimized cooling air openings ensure good ventilation of the housing and the permissible temperatures at the heating tube bases. Recessed cooling slots in the end plates protect the cut edges of the mounting cutout from excessive temperature stress. We only use high-performance glass ceramic that has been optimized for infrared radiation. The glass ceramic panel is surrounded on all sides to ensure compliance with the protection class. All burrs of the cut-outs are inside to avoid injuries during installation. The housing is made of electrolytically galvanized sheet steel, making it durable and robust. Three fastening straps on both long sides ensure a secure hold. The strain relief of the connection cable is high temperature resistant. As a heating tube, we use our proven product Thermolight lights, which has been tested and certified by Seiberdorf Laboratories (certificate no. LE-G 0149-1 / 09). The connection consists of a 3.0 m long heat-resistant silicone cable with a GST18i3 plug. Our infrared emitters type RotLicht & WeissLicht meet protection class IPX4 when installed. The required fire protection tape is part of the delivery.

The infrared heater Sauna WeissLicht Top are suitable, depending on the performance, for installation in a cavity wall, for wall construction in a mounting frame in a sauna or infrared cabin, and also for installation in the ceiling of a sauna above a lounger.

(Technical changes, errors and misprints are reserved.)