Infrared heater sauna RedLight Basic Set-1

- Infrared deep heat radiator ABC full spectrum
- tested and certified by SEIBERSDORF Laboratories!
- In a set with infrared control DT1 or DT3 (see option)
- ideally suited as a retrofit for sauna
- Waterproof IPx4 and temperature resistant
- High-performance glass ceramic panel in red
- Concealed installation in the sauna WALL or CEILING

Scope of delivery:
1 x infrared heater (option 350, 500, 750, 1300 watt)
1 x built-in glass ceramic cover plate in RED
1 x fire protection tape 2.5m
1 x silicone connection cable including plug (GST18i3) 3m
1 x infrared heater control DT1 or DT3 (see option)
1 x connection cable control / socket, 5m (see options)

Infrared heater RotLicht Basic for sauna
Our infrared sauna deep heat radiator has been specially developed for your sauna or infrared cabin for installation in the wall or ceiling, in order to do something good for your body with infrared deep heat. So you have the ideal product, because only infrared A-B-C full-spectrum heater tubes tested and certified by the Seibersdorf Laboratories institute are installed in our infrared heaters. The infrared "A" component in particular ensures a high penetration depth that effectively reaches your joints, tendons and muscles.

Dimensions:
• External dimensions: 805 x 155 x 55 mm
• Installation cutout: 811 x 161 mm

Effective irradiation distance & installation instructions:
• 350 watts> 5-35 cm (wall & ceiling installation)
• 500 watts> 10-50 cm (wall & ceiling installation)
• 750 watts> 40-90 cm (only ceiling installation)
• 1300 watts> 80-130 cm (only ceiling installation)

Technical specifications:
Connection voltage 230 V, 50-60 Hz.
500W (2.2A), 750W (3.3A), 1300W (5.7A)
Weight about 2.5 kg

Infrared heater control DT1
• 3 outputs each up to 1300 watts
• however, all 3 outputs overall line max. 3,650 W
• Dimming function: 50-60-70-80-90-100%
• Time setting: 5-15-30-60-120-180 minutes
• 3 built-in sockets GST 18 i
• Safety temperature sensor: 130 ° C
• Connected load: 230V AC, 50/60 Hz

Option: infrared heater control DT3
• 3 separately controllable outputs each up to 1300 watts
• Separate intensity control and individual on / off switching

Warnings:
The ventilation openings of the IR radiator must be kept free for heat dissipation. In the case of ceiling installation, the distance to the ceiling via IR radiators should be around 10 cm.

(Technical changes, errors and misprints are reserved.)