Sauna control unit EOS EmoTouch 3 white

Sauna control unit EOS EmoTouch 3 white - control up to 8 cabins with just one control unit!

Latest generation touchscreen control unit - a control system that turns your sauna into a real experience.
With just one control panel, you always have an overview - you can switch to each individual cabin and make individual settings or access all cabins and monitor their operating status at lightning speed.
All cabins can be switched on or off at the push of a button. The extensive setting options give you the opportunity to customize each cabin as you wish and to optimize operation with innovative tools.
EmoTouch 3 - the most advanced control device in the world. As unique as your requirements.

A controller for:
- Dry Finnish sauna
- Bi-O sauna with moisture operation
- Steam bath
- Turkish bath (Hammam) or Roman bath (Laconium, Tepidarum)
- infrared cabin

Technical specifications :
Electrical connection: 400 V 3N AC 50 Hz
Switching capacity: 9.0 kW (expandable: EMOTEC L09 / LSG 18 / LSG 36) / 3.0 kW evaporator in damp mode
Temperature control range: 30 ° - 115 ° C (dry) / 30 ° - 70 ° C (humidity operation)
Humidity control: proportional to time or optionally via humidity sensor (rel.%).
Heating time limitation: 6 h, 12 h, infinite
Delay start: 24 hours or weekly timer
Light output: 230 V / max. 100 W, dimmable. Ohmic, capacitive, inductive load
Fan output: 230 V / max. 100 W, adjustable
Sensor: digital, with 5 m cable. Bench sensor optional
HBT control unit: 14 x 21 x 4.2 cm recessed mounting (12.7 x 18.8 cm cutout)

Scope of delivery :
1. Power section with 2-part front cover
2. 8 grommets
3. 3 wood screws 4 x 25 mm
4. 5 m connection cable with RJ14 / RJ10 modular plug
to the control unit
5. Disassembly tool for control unit
6. EmoTouch 3 control unit with housing for wall installation
7. Installation and usage instructions
8. Ferrite ring for data lines
9. Cable for protective temperature limiter (STB)
10. Replacement fuse for STB
11. Temperature sensor incl. 5 m connection cable with
RJ10 plug, housing, board, 2 screws 4x40 mm

(We reserve the right to make technical changes, errors and misprints)