EOS Bi-O Invisio Optional additional evaporator for the under bench oven series Invisio.The external evaporator for Invisio sauna heaters can be mounted on the left or right on the Mini, Midi and XL versions and is available in the outputs 2 kW and 3 kW. The water tank is made of high quality stainless steel and holds approx. 12 l. The scope of delivery includes the steam outlet pipe with a rectangular herb bowl. This allows the steam outlet to be installed at the level of the top edge of the partition to optimize steam performance.
The evaporator is equipped with a dry-run protection and acoustic warning signal. For automatic water refilling, we recommend the optionally available FWA 01 Compact. The water outlet valve is equipped with two connection sleeves to enable the FWA 01 Compact and the water drain to be connected at the same time.
Filling via filling funnel, which can be variably installed in the cabin at water level. Emptying via hose extension and shut-off valve, can be attached individually in the cabin. The evaporator can be mounted on the left and right. Retrofitting possible later. Service-friendly by accessing the relevant components from the front - the additional evaporator can e.g. disassembled without having to move the oven.
The sauna heater is not included.
Technical specifications :
Electrical connection: 230 V N AC 50Hz
Supply line: 4 x 1.5 mm²
Dimensions H/W/D, in cm: 53 x 20 x 36 (without steam pipe)
Filling quantity: max. 12 l
Water pressure: 0 bar / open design
Scope of delivery :
1 x additional evaporator